Graveyard Performance 07-09 Gravedigger Mazdaspeed 3 Crash Bar
The wait is over!
On this page you are looking at our 100% Hand made, locally built crash bar for the 2007-2009 Mazdaspeed 3.
This crash bar was designed to 100% remove and replace the oem crash bar to fit the following larger intercooler cores:
- TR1035
- TR1045
- Mishimoto M Line
- Mishimoto S Line
This crash bar will not require any cutting, or modification to the OEM location to fit, it is 100% bolt on application.
Product Images do not reflect the finished product. Mounting tabs will be made for the oem location on the radiator core support.
Made of high quality T304 Stainless 1 1/4" Tubing 1/8" Wall and 3/16" CNC Cut Mounting brackets.
TR8 Intercoolers will require additional brackets, or custom piping as it sits higher than the larger and taller cores.
🔧🔧 Installation Difficulty: Intermediate
⏱️ Time Required: 2 hours
🔧 Tools Needed: Socket set, jack and stands
💡 Direct replacement for OEM crash bar
IN STOCK
*This product is to be used for off-road use ONLY. Graveyard Performance will hold no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.*
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Graveyard Performance 07-09 Gravedigger Mazdaspeed 3 Crash Bar
Graveyard Performance 07-09 Gravedigger Mazdaspeed 3 Crash Bar
The wait is over!
On this page you are looking at our 100% Hand made, locally built crash bar for the 2007-2009 Mazdaspeed 3.
This crash bar was designed to 100% remove and replace the oem crash bar to fit the following larger intercooler cores:
- TR1035
- TR1045
- Mishimoto M Line
- Mishimoto S Line
This crash bar will not require any cutting, or modification to the OEM location to fit, it is 100% bolt on application.
Product Images do not reflect the finished product. Mounting tabs will be made for the oem location on the radiator core support.
Made of high quality T304 Stainless 1 1/4" Tubing 1/8" Wall and 3/16" CNC Cut Mounting brackets.
TR8 Intercoolers will require additional brackets, or custom piping as it sits higher than the larger and taller cores.
🔧🔧 Installation Difficulty: Intermediate
⏱️ Time Required: 2 hours
🔧 Tools Needed: Socket set, jack and stands
💡 Direct replacement for OEM crash bar
IN STOCK
*This product is to be used for off-road use ONLY. Graveyard Performance will hold no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.*
Original: $61,500.00
-70%$61,500.00
$18,450.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The wait is over!
On this page you are looking at our 100% Hand made, locally built crash bar for the 2007-2009 Mazdaspeed 3.
This crash bar was designed to 100% remove and replace the oem crash bar to fit the following larger intercooler cores:
- TR1035
- TR1045
- Mishimoto M Line
- Mishimoto S Line
This crash bar will not require any cutting, or modification to the OEM location to fit, it is 100% bolt on application.
Product Images do not reflect the finished product. Mounting tabs will be made for the oem location on the radiator core support.
Made of high quality T304 Stainless 1 1/4" Tubing 1/8" Wall and 3/16" CNC Cut Mounting brackets.
TR8 Intercoolers will require additional brackets, or custom piping as it sits higher than the larger and taller cores.
🔧🔧 Installation Difficulty: Intermediate
⏱️ Time Required: 2 hours
🔧 Tools Needed: Socket set, jack and stands
💡 Direct replacement for OEM crash bar
IN STOCK
*This product is to be used for off-road use ONLY. Graveyard Performance will hold no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.*
